AddThis Social Bookmark Button kitchen designer » Kitchen Design

kitchen designer

April 17, 2006

Kosher Kitchens

Filed under: Kitchen Design — JACOBDSK @ 7:38 pm

What makes a kosher kitchen? It’s the way the kitchen is used and maintained, rather than the design or materials, although some materials may be preferable. Ritual Jewish law and practice dictates separation of meat from dairy, and this extends to having entirely distinct sets of dishes, silver, cutlery, cookware, sinks, appliances and countertop areas. During the week of Passover dishes are changed again, and it’s clear to see that observant Jews – particularly those with sufficient space – are in the market for additional cabinetry, as well as all of the other accessories that make a kitchen convenient and appealing. In the real world not every home is large enough to accommodate doubling or tripling of the kitchen space, nor is every customer wealthy enough to handle such a large investment. Those with severely modest means may have to box up Passover tableware and utensils and store them in closets for the other 51 weeks of the year. Sometimes a double sink will have to stand in for two separate units (even a single sink can be permissible, provided it is not of porous material and is properly cleaned before switching from meat to dairy or vise versa). A single dishwasher also may be acceptable to some authorities provided it has a stainless steel interior and the racks are changed depending on what dishes are being washed. Under the circumstances, it’s obvious that any kosher customer with the means id going to want to make their kitchen as large and as workable as possible. Other clients may also want large, easy to use kitchens and more than one dishwasher or sink, but for the kosher observant, it is almost a necessity. One of the more significant differences between a kosher and non-kosher kitchen is that most conventional kitchens are predicted on an invisible work triangle defined by the placement of one sink, one refrigerator and one range. In a kosher kitchen we have two overlapping triangles and, ideally, two sinks, two refrigerators and two ranges. There is more to designing a kosher kitchen than just adding extra appliances. Our Urban Homes designers have designed many kosher kitchens, and as with conventional designs, we realize that the ability to make every inch of space count is a highly valued skill. Accordingly, our designers advise customers to:  

  • Eliminate soffits and run cabinets all the way up to the ceiling. Use “magic corner” wire basket drawers to open up dead corners and facilitate cleaning in those corners. 
  • Recommend appliances that feature a Sabbath mode. With refrigerators, for example, this means a unit that allows the automatic fan to be turned off from Friday sundown to Saturday night (or to stay in a constant “on” position), thus releasing the residents of a household from inadvertently causing initiation of power usage during the Sabbath period when such activity is prohibited.
  • Recommend stainless steel sinks and steel or granite countertops and work surfaces for customers who can’t or won’t have fully discrete areas for meat and dairy. Make sure that the material is a pure granite or stone. Sometimes they are really composites and cannot be kashered. These surfaces can be used for both, provided that they are thoroughly cleaned and that boiling water is poured on them in between meat and dairy operations. 

    According to Star-K, which provides kosher certification, wood may also be kashered as stainless steel if it has a smooth surface and no cracks. Kosher law does not, however, allow kashering of plastic or materials with plastic components. When it comes to choosing appliances, whether the kitchen can accommodate two sets or not, it is important to keep kosher belief in mind. Case in point, according to Star-K, kashering a glass, Corning, halogen or electric smoothtop range can be a difficult process, as it is hard to kasher the area surrounding the actual burners. On a gas range the cast iron or metal grates upon which the pots sit may be inserted into the oven after they have been thoroughly cleaned. The grates can then be kashered simultaneously with the oven, making this and easier process (and possibly a better choice) for the homeowner. Of course, if there are any questions that arise during the design of kosher kitchen, we suggest that customers should be encouraged to ask for rabbinic guidance.

Kitchen Styles - 40 Guidelines

Filed under: Kitchen Design — JACOBDSK @ 7:35 pm
1a. Doorways at least 32″ wide and not more than 24″ deep in the direction of travel.
1b. Walkways at least 36″ wide.
1c. Work aisles at least 42″ wide for one-cook, at least 48″ wide in multi-cook kitchens.
2. Work triangle 26′ or less, with no single leg shorter than 4′ nor longer than 9′.
3. No major traffic patterns should cross through the work triangle.
4. No entry, appliance or cabinet doors should interfere with one another.
5. In seating area, 36″ of clearance from counter/table edge to wall/obstruction if no traffic passes behind seated diners. 65″ clearance for walkway behind seated diners.
6. Kitchens under 150 sq. ft.: 144″ of wall cabinet frontage with cabinets at least 12″ deep, 30″ high with adjustable shelving.
Kitchen over 150 sq. ft.: 186″ wall cabinet frontage, with cabinets at least 12″ deep, 30″ high with adjustable shelving.
7. At least 60″ of wall cabinet frontage with cabinets at least 12″ deep, 30″ high, included within 72″ of the primary sink centerline.
8. Kitchens under 150 sq. ft.: 156″ base cabinet frontage with cabinets at least 21″ deep.
Kitchens over 150 sq. ft.: 192″ base cabinet frontage with cabinets at least 21″ deep.
9. Kitchens under 150 sq. ft.: at least 120″ of drawer or roll-out shelf frontage.
Kitchens over 150 sq. ft.: at least 165″ of drawer or roll-out shelf frontage.
10. At least five storage/organizing items located between 15″ - 48″ above the finished floor.
11. At least one functional corner storage unit should be included.
12. At least two waste receptacles should be included in the plan: one for garbage and one for recyclables.
13. Knee space should be planned below or adjacent to sinks, cooktops, ranges and ovens. This space should be a minimum of 27″ high by 30″ wide by 19″ deep.
14. Clear floor space of 30″ x 48″ should be provided at the sink, dishwasher, cooktop, oven and refrigerator.
15. A minimum of 21″ clear floor space should be allowed between the edge of the dishwasher and any object which is placed at a right angle to the dishwasher.
16. The edge of the primary dishwasher should be within 36″ of the edge of one sink.
17. The primary sink should be located between or across from the cooking surface, preparation area or refrigerator.
18. At least 24″ clearance between cooking surface and a protected surface above; or 30″ clearance between cooking surface and an unprotected surface above.
19. All major appliances used for surface cooking should have a ventilation system, with a fan rated at minimum of 150 CFM.
20. Cooking surface not placed below an operable window unless window is 3″ or more behind the appliance and more than 24″ above it.
21. Microwave ovens placed so bottom is 24″ to 48″ above the floor.
22. At least two work counter heights: one at 28″-36″ above the floor; and one at 36″-45″ above the floor.
23. Kitchens under 150 sq. ft.: at least 132″ of usable counter frontage.
Kitchens over 150 sq. ft.: at least 198″ of usable counter frontage.
24. At least 24″ counter frontage to one side of the primary sink and 18″ on the other side. The 24″ must be at the same height as the sink.
25. At least 3″ countertop frontage on one side of secondary sink, 18″ on the other side. The 18″ must be at the same height as the sink.
26. At least 15″ of landing space, minimum 16″ deep, above, below or adjacent to microwave oven.
27. Open-ended kitchen: at least 9″ counter space on one side of cooking surface and 15″ on the other, at the same height as the appliance.
Enclosed kitchen: at least 3″ of clearance space at an end wall protected by flame retardant material; 15″ on the other side at the same counter height as the appliance.
28. At least 15″ counter space on the latch side of the refrigerator or on either side of a side-by-side; or at least 15″ counter space no more than 48″ across from refrigerator.
29. At least 15″ of landing space, minimum 16″ deep, next to or above oven if it opens into a primary traffic pattern. If it does not open into traffic, 15″ x 16″ landing space needed.
30. 36″ continuous countertop at least 16″ deep for the preparation center. This center should be immediately next to a water source.
31. For two adjacent work centers, determine a minimum counter frontage: longest of the two required counter lengths and adding 12″.
32. No two primary work center separated by a full-height, full-depth tall tower configuration.
33. Minimum clearances for seating areas: 

  • 30″ high table/counter: 30″ w x 19″ d table/counter for each seated diner with 19″ clear knee space.
  • 36″ high counter: 24″ w x 15″ d counter space for each seated diner with 15″ clear knee space.
  • 42″ high counter: 24″ w x 12″ d counter space for each seated diner with 12″ of clear knee space.
34. Open counter corners should be clipped or radiused; eliminate sharp corners.
35. Controls, handles and door/drawer pulls operational with one hand.
36. Wall-mounted room controls 15″ - 48″ above the finished floor.
37. Ground fault circuit interrupters specified on all receptacles within the kitchen.
38. Fire extinguisher visibly located in the kitchen, away from cooking equipment and 15″-48″ above floor.
39. Window/skylight area equals at least 10% of total square footage of kitchen or total living space which includes the kitchen.
40. Every work surface in the kitchen should be well illuminated by appropriate task and/or general lighting.

 

April 2, 2006

Kitchen Design - Budgeting

Filed under: Kitchen Design — JACOBDSK @ 8:30 pm

The most important part of any remodeling project is making sure you don’t go over your budget. Doing so can lead to settling for unexpected options, disagreements with contractors and worst case, an unfinished room. Follow these steps below to make sure you get the most for your money!

  • Make sure you visit a showroom and see exactly what you are buying and check out the quality for yourself.
  • It is recommended to have a retailer visit your home before accepting a quote for the design and installation of the room. Once they have completed a survey, you should get a full quote for the project.
  • Most deposits don’t exceed more than 50% of the total contract value. Try to get a written schedule of payments upfront so there are no misunderstandings along the way.
  • It’s best to wait until all your goods are delivered before you pay in full. Companies that ask you to make a full payment ahead of delivery have your money – but you don’t have your appliances. 
  • Be aware of everything in a written contract before you sign it. Some ‘Terms and Conditions’ have expensive cancellation fines.

Kitchen Design - getting started

Filed under: Kitchen Design — JACOBDSK @ 8:30 pm

Ok, now you know your kitchen or bathroom needs remodeling, but you still don’t know where to begin! It may seem like the list of things-to-do is endless, but don’t worry, just follow the steps below and take our advice. You’ll be on your way in no time!

1.      Decide What You Want

  • What is the main purpose of remodeling your room? To add extra space, upgrade the kitchen/bathroom, improve security, make changes for health reasons, or just to improve your living space
  • What are your options? Is there room to expand into the back/front yard or is there enough room to redesign using the existing floor space?
  • What are your priorities? Figure out what you what to change the most, and what can you keep or just update
  • Get input from all members of your household – find out their needs and wants
  • Consider short-term and long-term implications of your renovation decisions (Will you have more/any children, how long you plan to live in this house, will your choices increase/decrease its resale value?)

2.      Collect Ideas and Information

  • Read magazines and books to get an idea of the ‘look’ you want
  • Make a clip book of all the pictures and ideas that represent your taste and style
  • Watch related television shows and record episodes you particularly like
  • Visit home shows and manufacturer/supplier showrooms
  • Talk to relatives, friends and co-workers that have renovated. What have they learned, what would they recommend

3.      Determine Your Budget

  • Break down your priorities and figure out what you are willing to spend the most money on
  • What’s the total amount you are willing to spend?
  • How much can/are you willing to borrow? 
« Previous Page

Powered by WordPress